IPS is now proud to include "Evapo-Rust De-Rusting Solution" in its fine line of corrosion-prevention solutions.
"Introducing the award-winning rust removal technology which is sure to blast all other conventional methods out of the water!"
Evapo-Rust De-rusting Solution:
· Reusable
· Neutral pH - water-based
· No scrubbing
· Non-Toxic
· Biodegradable
· Safe on multi-surfaces
· De-rusts without dismantling
· No-VOC's or HAP's
· No acids or bases
· No protective wear needed
· Non-flammable
· Will not pit un-rusted steel

Guideline For Use:
Pre-clean items to remove oil and dirt. Rinse items and immerse fully in Evapo-Rust. Check progress periodically. Works best when the solution is at 60 degrees F or higher. Soak time varies with severity of rust. Light surface rust will require 5-30 minutes, moderate rust up to 4 hours, and deeply rusted parts may require overnight soaking. To prep surface for coatings; once rust is removed rinse item with soap and water, dry and apply coating per manufacturer's instructions. Evapo-Rust can also be used as a temporary rust inhibitor. To prevent re-rusting, simply dip the item back in the Evapo-Rust and allow to dry. Package the clean part with IPS VCI for best results.
Physical Properties
Form Liquid, water-based rust remover solution
Formulation Selective Chelation at pH 6.1 to 7.0 (Neutral)
Process Soak / Dip via Immersion
Packaging 1 Gallon, 5 Gallon, 55 Gallon drum containers

Evapo-Rust technology washes away surface rust with a unique non-acidic, water-based solution that virtually eliminates the need for laborious blasting, grinding or the use of harsh caustics and chemicals. Evapo-Rust's neutral pH formulation uniquely bonds only to rust and will not affect iron/metal compositions, plating or even non-oxide paint coatings. It will not harm copper, brass, aluminum, plastic, rubber, wood or even vinyl. It will not remove non-oxide coatings, such as paint or chrome, that are still adhered to the surface. Simply immerse the rusted item into Evapo-Rust and watch the rust disappear in approximately 30 minutes to 24 hours.
Typical Applications:
· Engines
· Turbines
· Military
· Manufacturing
· Marine / Boat Parts
· Construction
· Fabricators
· Automotive
· Tools
· Paint Prep
· Ship Yards
· Metal working
· Machine Shops

Storage and Disposal
Store unused Evapo-Rust in a cool, dry place, away from direct sunlight. Do not store above 130 degrees F (55 degrees C). Evapo-Rust is sewer able in neat form. If no hazardous contaminants are introduced, only the iron content of the solution should dictate the disposal method. In most cases, it can be safely put down the drain. Always dispose of product per local, state and federal regulations.